IKO CFE18UU Cam Follower and Track Roller - Stud Type

L:160 mm; e:34 mm; Recommended tightening torque for set screw:16.8 Nm; d:63.5 mm; A2:73.7 mm; T min.:-20 °C; N:21mm; s1:32.55 mm; Z:53 mm; H:258 mm;

Preload level:8; Nlim (grease):22,000 rpm; Db max:79.5 mm; d2:66.15 mm; Axial displacement K Factor:1.01; Characteristic outer ring frequency, BPF0:14.81 Hz; rs min:1 mm; d1:68.1 mm; Nlim (oil):30,000 rpm; Static load, C0:8.2 kN;

Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):35; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Bearing Retained:No; Volume Discount:Available; Flange Shape:Round Type; Number of Bearings:Double; Volume Discount:Available;

Precision Grade Symbol:No; Special Configurations Code:No; Material Symbol:No; Load Direction:Radial; RoHS:6; Size Standards:Metric System; Rolling Element Material:Steel; Outer Ring:With Outer Ring; Acoustic Symbol:No; Seal, Shield Symbols:No;

Fit:J7; Seal:Triple seals; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Machining:No; Basic Load Rating, Dynamic Rating(N):72700; Surface Treatment:No; Basic Load Rating, Static Rating(N):53000; Fit:J7; RoHS:6;

S:6 mm; T min.:-40 °C; A:25.5 mm; A1:12 mm; Weight:0.3 kg; C:9.55 kN; d:15 mm; J:78 mm; A2:31 mm; Dz:46 mm;

Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Bearing I.D. d(mm):12; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Bearing Mate

A1:24 mm; A:50 mm; S:7.5 mm; d:22.22 mm; T min.:-40 °C; C:14 kN; N:13mm; T max.:100 °C; s1:13.5 mm; Recommended tightening torque for set screw:3.7 Nm;

SW:4.76 mm; s1:32.55 mm; C:52.5 kN; C0:32.8 kN; T max.:200 °C; Weight:1.67 kg; B:65.1 mm; Recommended tightening torque for set screw:16.8 Nm; A5:39.7 mm; Designation of bearing:UC212-36G2T20;

Unit, Type:Insert Bearing Unit; Rolling Element Material:Stainless Steel; H(mm):47.6; Unit, Type:Insert Bearing Unit; Type of Insert Bearing:Cylindrical Bore Sha; Basic Load Rating Cr(KN):22; Unit Body Material:Plastic; Unit Body Material:Plastic; Pillow Type, Category:Lightweight; Pillow Type, Cate

Days to Ship:8 Days; Number of Bearings:Single; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Number of Bearings:Single; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Retained:Yes (with retaining;

Da max:46.4 mm; D:52 mm; rs min:1 mm; Min operating temperature, Tmin:-40 °C; Y2:2.98; Max operating temperature, Tmax:200 °C; k:1.5 mm; Nlim:17,000 rpm; Mass:0.15 kg; Radial clearance class:C3;

A:10.5 mm; s1:21.75 mm; S:10.9 mm; T max.:100 °C; A2:32.6 mm; N:13,5mm; Designation of bearing:US210-30G2; A1:8 mm; Weight:1.7 kg; B:43.5 mm;

d1:67.2 mm; Designation of housing:P210N-; H:57.2 mm; Z:24.4 mm; L1:65 mm; J:159 mm; L:206 mm; T min.:-20 °C; H2:114 mm; Weight:3.01 kg;

T min.:-40 °C; Recommended tightening torque for set screw:8 Nm; d:41.28 mm; G:M6x1; Designation of bearing:UC209-26G2T04; T max.:100 °C; s1:24.6 mm; N1:24 mm; H2:106.4 mm; B:49.2 mm;